Slash Street Stock - 

CHASSIS:

Traxxas Slash 2WD High Center of Gravity (HCG) or SLASH Low Center of Gravity (LCG) ONLY!

Modifying, replacing, or removing any components is NOT permitted.

Side nerf bars and rear bumper are optional. If nerf bars are used they must be the stock 2wd slash nerf bars or RPM nerf bars. If rear bumper is used it must be the stock 2wd slash rear bumper or RPM bumper for 2wd slash

Any additional weight must be added within the main top tub of the chassis plate area.

Adding weight to nerf bars, bumpers, headers, suspension arms, or any component not within the main chassis area is NOT permitted.

The ESC, receiver & transponder must be mounted within the main chassis plate area.

Sway Bars are NOT permitted.

SHOCKS:

Stock Traxxas Slash Ultra Shocks ONLY! (Grey or Black)

Traxxas Big Bore Shocks are NOT permitted.

Front shocks on front. Rear shocks on rear. Shock shafts must be front in front, rear in rear. 1,2 or 3 hole stock Traxxas pistons are allowed.

Aluminum shock caps are permitted.

Any weight shock oil is permitted.

Internal shaft travel limiters are permitted.

External travel limiters i.e. "Bump stops" are NOT allowed on any corner of the car.

2-stage pistons or any modification to the shock piston to tune the compression and rebound separately are NOT permitted.

No aluminum shock towers allowed.

SPRINGS:

Any Traxxas Slash tuning spring is permitted.

Cutting or altering of the spring is NOT permitted.

CONTROL ARMS AND HEXES:

Must use stock 2wd slash front and rear control arms only!

Front arms #3631 any color Rear arms #2555 any color

RPM arms are allowed Front #8024 any color Rear #8059 any color

Control arms MUST be mounted on the car in the correct position AND orientation that they were deigned to be put on the car.

LR on LR, RR on RR, LF on LF, RF on RF

NO flipping of arms, NO left arms on right, NO front arms on rear etc!

NO 4x4 slash arms, NO rustler, stampede, or any other arms that are not the part numbers for a stock 2wd slash.

Rear tires must both have TOE IN! NO modifications can be done to change the natural toe built into the rear of the car to gain an advantage using rear steer or less toe.

NO aluminum control arms allowed.

Factory plastic grey and black 12mm wheel hexes only!

Any combination of hex location is allowed.

TIRES:

Open Rubber tire as long as it is mounted on a 2.8" Stadium Truck Wheel OR mounted on a 2.2"x3.0" Short Course Wheel. Any Offset is allowed.

The tire must be made for the style of wheel it is mounted on as well. (NO 2.2" tires on 2.8" wheels, etc)

NO 2.2",2.4", 60mm etc buggy wheels and tires permitted.

NO 17mm hex 1/8th scale wheels or tires allowed.

Altering the inside of the tire in any way is NOT permitted.

Gluing or taping the outside of the tire to help prevent traction rolling is permitted.

SERVO:

OPEN.1/10 Scale. 

Aluminum servo arms are permitted.

MOTOR:

Traxxas TITAN 12T 550 brushed motor ONLY!

Tuning, tweaking, or modifying the motor is NOT permitted.

Zapping magnets is NOT permitted.

ESC:

Traxxas Stock XL-5 ESC or HobbyWing 1060 Brushed ESC

The stock bullet connectors from the ESC to the motor must be used.

Soldering the bullet connectors to the motor is NOT permitted.

BATTERY:

Max Charge of 8.44v!

LIPO or LIHV - CELL: 2s only/ MAH: 8200 Max 8.44v max charge rate. Can be checked at any time!

NIMH – 7 cell max!

Any brand permitted.

Battery must be mounted in the stock center tray location, but may be moved forward or back as long as it stays within the stock boundaries of the battery tray.

Any plug style may be used for the battery to ESC connection.

Direct soldering to the battery is NOT permitted.

SPUR GEAR:

Traxxas Slash 48P Spur Gears must be used. No modification of any kind can be done to the gear.

Size choices: 76T, 83T, 86T or 90T.

PINION GEAR:

OPEN. May be plastic, aluminum or steel

FANS:

Motor and/or ESC fans are NOT permitted.

TRANSMISSION:

Stock Traxxas 2WD Slash transmissions ONLY!

The 272R transmission is NOT allowed!

Locking or modifying the differential in any way is NOT permitted.

The differential must have normal action when rotating one rear tire against the normal compression of the motor.

Direct replacement Traxxas 2wd slash transmission parts are permitted.

All transmission gears must be STEEL! No modifications are allowed.

The 272R Steel Top Shaft part number TRA9494 is ALLOWED as a durability upgrade over the stock top shaft with the roll pin. The 272R top shaft is .4 grams HEAVIER than the stock top shaft and is no performance advantage over the stock shaft. These are the only two options for top shafts and the only part that is allowed to be ran that is from the 272R transmission. DO NOT TRY TO PUSH THIS RULE!

Ball differentials are NOT permitted.

BODY:

SHARK RC BODIES STREET STOCK BODIES OR MCALLISTER O.D.D. DESIGNS BODIES LISTED BELLOW ONLY

CHEVROLET CAMARO (JOKER)

DODGE CHALLENGER (HAT TRICK)

FORD MUSTANG (VILLIAN)

CADILLAC CTS (CADDYSHACK)

CHEVROLET MONTE CARLO (HITMAN)

TOYOTA CAMRY (ZERO)

TOYOTA SUPRA (RIDDLER)

2023 DIRT CAMARO (T.K.O)

2005 DIRT MUSTANG (OUTLAW)

70s CAMARO (SIX PACK)

GTO (JUDGE)

NOMAD (SHAGGIN WAGON)

ODD DESIGNS CAMARO (#2201)

ODD DESIGNS MUSTANG (#2203)

ODD DESIGNS CAMRY (#2205)

ALL BODIES WILL HAVE A 1.5" MAX SPOILER HEIGHT!

SPOLER END CAPS THAT COME WITH THE SHARK BODIES OR HOME MADE EQUILIVELANTS ARE LEGAL. 1 INCH MAX HEIGHT!

NO SIDE DAMS, WICKER BILLS OR ANY OTHER AERODYNAMIC DEVICE ARE ALLOWED ON THE BODY ANYWHERE!

Decking the body is LEGAL!!!

FRONT BUMPER:

Cutting of the "hoop" and "ears" on the front bumper is permitted.

The main area of the bumper must remain intact unless you are running the Shark RC Bodies LLC/Sippel Speed Shop front body mount/bumper.

TRANSMITTER/RECEIVER:

OPEN. NO GYROS OR ANY OTHER DRIVING AID ARE ALLOWED!

PERMITTED UPGRADE PARTS:

Traxxas Aluminum (Model#) – Any Color:

Steering Bellcrank (#3743)

Caster Blocks (#3632)

Steering Blocks (#3636)

Rear Stub/Axle Carriers (#3652)

Turnbuckles (#3737)

RPM (SKU) – Any Color:

Front Arms (8024)

Front Shock Tower (8085)

Front Bulkhead (7375)

Front Bearing Carriers (8037)

Caster Blocks (8071)

Front Bumper (8095)

Rear A-Arms (8059)

Rear Shock Tower (8083)

Rear Bearing Carriers (8038)

Rear Bumper (8100)

Mount for Rear Bumper (8090)

Motor Protector (8091)

STRC (Model) – Any Color:

Aluminum Battery Strap (ST3727)

Heat Treated Polished Steel Lock-Nut Style Hinge Pins (ST3640)

PRO-LINE (SKU)

Front & Rear Body Mounts (6070-00)